Wire and cable extrusion line is a manufacturing process for shaping molten plastic. All our wire and cable extrusion line equipments solution are customized to meet specific requirements and needs
Screw diameter φ90mm
Screw material 38CrMoAlA
L/D ratio 25:1
Screw speed 100rpm
Screw type BM
What is cable extrusion ?
An extrusion machine is a device which pushes or pulls a material through a shaped die to form a continuous length of product with a preset cross section. The extrusion process is used to produce a large number of commercial products which include steel or copper wire, plastic tubing, plastic sheets, and many food types. Extrusion as manufacturing process offers many benefits such as the wide range of complex cross sections possible and the ability to form brittle materials. Depending on the material used, one cable extrusion line machine may form the material cold or hot with some types of materials being completely melted prior to extrusion.
Wire and cable extrusion line is a manufacturing process for shaping molten plastic. All our wire and cable extrusion line equipments solution are customized to meet specific requirements and needs
Introduction of cable extrusion line:
While considering the amount of extrusion, we also consider the plasticization, linear performance of extrusion, shear heat, and the service life of the screw. Only five of them are considered to be a perfect screw design. Our company has its own screw designer and developer, and we have been studying high-efficiency and energy-saving new extrusion screw and special material screw all the year round. We have unique research and application for cable extrusion line of high flame retardant and high viscosity materials.
Application
Our cable extrusion factory uses polyethylene, polyvinyl chloride and other hot extrusion methods to make the wire core insulated to protect the cable. The whole machine is composed of feeding rack, main extruder, cooling water tank, blow-dryer, printer, capstan winch, take up. temperature control electric operating cabinet, etc.
Main Parameter:
Screw diameter φ90mm
Screw material 38CrMoAlA
L/D ratio 25:1
Screw speed 100rpm
Screw type BM
Motor 90kw Siemens AC frequency motor
Heating capacity 30KW
Heating temperature 0~ 300℃
Machine center height 1000mm
Maximum output 400 Kg±5%/h (calculated for PVC sheathing material).
Cooing method Feeding Zone – Water Cooled ，barrel is air cooled.
Connected with cross head by harf.
Barrel pressure sensor Included Barrel blasting switch: included
The bearings of main parts Chinese high quality brand:HRB / ZWZ/ LYC